Kontaktieren Sie uns
Custom RF Cable Assemblies
+86-755-85229451 sales@rfcableassemblies.com
01. RF cable assemblies part number scheme
Normally the simply part number is adopted when listed on the website, for example:
SC-XXXXX-SMAM-BNCMRA
1. “XXXXX” will be replaced by exact coaxial cable type.
2. SMAM means SMA Male Straight
3. BNCMRA means BNC Male Right Angle
02. RF cable assemblies length measurement
A: For two ends with straight connectors, the assembly length is measured from one connector end to the other connector end,
B: For two ends with right angle connectors, use the pin center-line as shown in below drawing.
C: For two ends with one straight connector and another right angle connector, the assembly length is measured from straight connector’s end to the right angle connector’s pin center-line.
D: For two ends with one straight connector and another straight cut lead, the assembly length is measured from straight connector’s end to the straight cut lead end.
03. RF Cable Assemblies Length Tolerance
RF Cable Assemblies Length Tolerance
| Length (mm) | Tolerance (+/- ) |
| 0-100 | (+/- ) 3 mm |
| 101-500 | (+/- ) 5 mm |
| 501-1000 | (+/- ) 10 mm |
| 1001+ | (+/- )Length*1.5% |
04. Delivery Time
For samples, can be shipped in 1-2 working days after confirmed for our normal rf cable assemblies with materials in stock, and will be shipped in 3-5 working days for customized materials.
For batch order, we prepare some thousand pieces in stock for normal RF cables and can be shipped in 1-2 working days after tested before shipping. For customized antennas the delivery time will be 5 -10 working days depended on the material situation.
05. Payment
T/T , L/C, Paypal is acceptable.